Datasheets and manuals
Specification sheets and manuals as PDFs, for quoting a job, filing with a submittal, or reading on a phone at the gate.
How the KNECT radio works, from spread spectrum to the link budget, is in the Aether RF radio whitepaper.
Installing a system
Step by step for each configuration, written to be read on a phone with the hardware in front of you.
- Point to Point installation guideTwo KNECT Endpoints. One door or gate.
- One to Many installation guideA Gateway and a Tether at the panel, an Endpoint at each door or gate.
- Wiegand Wave 150 installation guideTwo Wiegand Wave 150 units. Wiegand only, one door or gate.
Wiring both roles in a pair is in the Central and Remote wiring guide.
Datasheets
The specification sheets, with the radio, power, relay and dimension figures.
| Document | What it covers | Part numbers | File |
|---|---|---|---|
| KNECT Endpoint datasheet, PDF, 2 pages, 505 KB | Specifications for the Endpoint on its own: radio, power, relays, inputs and dimensions. | KEP-200 | PDF, 2 pages, 505 KB |
| KNECT Gateway and Endpoint datasheet, PDF, 7 pages, 1.8 MB | Both halves of a one to many system, including how many Endpoints a Gateway runs and what the Gateway needs from the panel. | KGW-100, KEP-200 | PDF, 7 pages, 1.8 MB |
| Wiegand Wave 150 datasheet, PDF, 2 pages, 414 KB | Specifications for the Wave: radio, power, relays and dimensions. | WW150 | PDF, 2 pages, 414 KB |
Manuals
The printable versions, for a submittal package or a job folder.
| Document | What it covers | Part numbers | File |
|---|---|---|---|
| Wiegand Wave 150 user guide, PDF, 13 pages, 696 KB | The full manual: mounting, wiring both roles, the DIP switches, pairing, the LEDs and testing. | WW150, WW152 | PDF, 13 pages, 696 KB |
| Point to point quick start guide, PDF, 4 pages, 557 KB | The short version of a two-Endpoint install, for somebody who has done one before. | KEP-200, KEP-202 | PDF, 4 pages, 557 KB |
| One to Many install guide, PDF, 6 pages, 3.0 MB | A Gateway, an ARF Tether and Endpoints from start to finish: mounting, wiring each pairing zone, the Tether, DIP switches and pairing. | OTM-K, KGW-100, ARF-T100, KEP-200 | PDF, 6 pages, 3.0 MB |
Looking for a document that isn't here
Ask Aether RF product support for it.
Weekdays, 8:30am to 5:30pm Arizona time. Send a support request instead.